SmartChip™ Eco Advantage
Operate your Softub® for only $15 a month! Our patented
SmartChip™ power monitoring
system powers the Hydromate® System, preventing the pump from turning on if voltage is too low, which can cause damage to your pump.
Additionally, the SmartChip® will also reset your Softub®, and turn it back on once power
levels return to normal. Shop online today!
Energy-efficient Hydromate® System Benefits Include ...
Inexpensive
No expensive, unreliable heater.
Long-lasting
Unsurpassed longevity of the pump motor, as it is a
water-cooled system.
Easy-to-use
Plugs into a standard isolated 15 amp/115 volt outlet.
Consistency
Your Softub® will maintain your desired temperature in all climates year-round.
Low power
A 115v Spa that can operate both heat and jets simultaneously.
Efficient
Falls below the maximum allowed electric usage set by the CEC.
The most energy-efficient hot tub on the market! Softub® hot tubs are remarkably inexpensive to operate. The calculation is based upon California Energy Commission protocol, using a 220 Softub® every day for 20 minutes while using the jets. The water temperature was always maintained
at 102° F, with an outdoor ambient temperature at 60° F using the national average electricity cost or national average cost per kilowatt. Use your Softub® EVERY DAY for less than $15 a month!
Heat Recovery Technology
The Softub® Hydromate® system was designed with heat recovery
technology, incorporating the pump, motor, and heating systems into one single unit.
Thanks to the clever arrangement of these technical components, the water is heated
with the motor’s excess heat. Softub® incorporates the
SmartChip™. With the SmartChip™, Softub® hot tubs
maintain the set temperature on the control panel by turning the pump on and off
automatically.
The built-in safety mechanism prevents the tub from overheating if
there’s a problem with the temperature sensors as well as prevents the pump from
turning on if the temperature is too high. The SmartChip™ prevents
damage to the pump by turning on if the voltage is too low.